DIVE GEAR

LIGHTING

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

FINS

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

STEEL HARDWARE

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

HEATING SYSTEMS

Transport bags

Hygiene and Care

Weight

Outlet

Tools

Face Mask

Miscellaneous

Compressors

Fuera de Stock

Ask us about availability

J.Dive HQ rubber hoses

J.Dive HP hoses

15.97 €

HP hoses manufactured with a somewhat harder rubber than the standard HP hoses available at the market. This offers a better resistance to abrasion and is especially indicated for users who use the equipment in a hard conditions. If you need any hose length not available in the drop-down menu, chose the next higher one and let us know the exact length...

Fuera de Stock

Ask us about availability

J.Dive HQ rubber hoses

J.Dive, regulator rubber hoses

13.31 €

Traditional rubber with brass fittings Length is measured from end to end of hose 3/8-inch male to 1st stage - 9/16-inch female to 2nd All hoses are Nitrox Ready

Fuera de Stock

Ask us about availability

SPARE PARTS

Latex Neck Seal

19.99 €

Latex Neck Seal 1mm thick to stick in dry suit. Available in 4 sizes: S: for necks from 24 to 32cm M: for necks from 28 to 37cm L: for necks from 35 to 43cm XL: for necks from 42 to 50cm

Fuera de Stock

Ask us about availability

Seals

Latex Wrist Seal bottel shape

9.50 €

Latex Wrist Seal with round shape spare part.To glue to the drysuit. Note! Wrist seals are sold by piece (not pairs). Three size available: S:13-16cm wrist circumference M: 16-18cm wrist circumference L: 18-22cm wrist circumference

Fuera de Stock

Ask us about availability

Seals

Latex Wrist Seal round shape

9.50 €

En Stock

-26%

Available

CONTROL INSTRUMENTS

Metalsub Gauge capsule diameter 50 mm

INS-SPR-0001

29.51 € 39.88 €

Pressure gauge capsule for stage tanks, thanks its small size is perfect for this use. Chromed brass body and highly resistant plastic glass. It is also the replacement for the pressure gauges mounted with a protector from Metalsub, Cressi, etc ...

En Stock

Available

Transport bags

Metalsub MAMMOTH DRY BOX 80 Liters

BOX-DRY-0080

62.99 €

The Metalsub Diving Box can be used to store and transport your scuba diving equipment before and after diving.

En Stock

-26%

Available

Pressure Gauge

Metalsub Nitrox pressure gauge 50mm

ins-spr-0010

29.51 € 39.88 €

Pressure gauge Oxygen compatible capsule for stage tanks, thanks its small size is perfect for this use. Chromed brass body and highly resistant plastic glass. It is also the replacement for the pressure gauges mounted with a protector from Metalsub, Cressi, etc ...

En Stock

-20%

Available

CONTROL INSTRUMENTS

Metalsub Pressure gauge with hose

INS-MAN-0001

55.43 € 69.28 €

Metalsub Pressure gauge with 80cm hose and protector.Chromed brass body and highly resistant plastic glass.

En Stock

-32.12%

Available

CONTROL INSTRUMENTS

Metalsub TECH Gauge Tempered Glass.

INS-MAN-0100

43.99 € 64.81 €

This pressure gauge is intendeed-ideal for stage tanks, thanks its small size is perfect for this use. It has been reinforced at the front part with an extra metal cover and a highly resistant Tempered glass. This pressure gauge will resits the hardest use we can give it.

En Stock

-25%

Available

CONTROL INSTRUMENTS

Mini gauge Metalsub

INS-MIN-0001

14.99 € 19.99 €

Metalsub Pony Gauge with BAR and PSI scale, designed to be installed directly in the first stage, it has a 7/16 UNF thread, the standard pressure gauge thread.

Fuera de Stock

Ask us about availability

SPARE PARTS & EXTRAS

Neck Tank M25 O-Ring

1.00 €

Tank neck O-Ring available in two options: Option 1: standard Option 2: Viton O2 compatible

En Stock

Available

Service kits and O-Rings

O-Ring for 3/8" hose

J. Dive 3/8"

1.50 €

4 O-Rings for the 3/8 "terminal of the low / medium pressure hose (the O-Ring that goes into the terminal of the regulator and inflator hoses that enters the 1st stage)

En Stock

Available

Service kits and O-Rings

O-Ring for 9/16" hose

J.Dive 9/16"

1.50 €

4 O-Rings for the 9/16" terminal of the regulator hose (the O-Ring that goes into the terminal of the regulator hose that enters the 2nd stage) 4 units

En Stock

Available

Service kits and O-Rings

O-Ring for HP hose (7/16")

J.Dive 7/16"

1.50 €

4 O-Rings for the 7/16" terminal of the HP hose (the O-Rings that goes into the high pressure hose terminal that enters the 1st stage) 4 units

En Stock

Available

Service kits and O-Rings

O-Rings for the pressure gauge nipple

J.Dive juntas vástago

1.50 €

4 O-Rings for the pressure gauge nipple

Fuera de Stock

Out-of-Stock

Miscellaneous

OCTOPUS MOUTHPIECE COVER

por.met2

3.55 €

100 % thermoplastic semiflexible plastic. It holds safely the octopus avoiding the entry of sand but guaranteeing an easy liberation in case of need.

View

En Stock

Available

Miscellaneous

OCTOPUS MOUTHPIECE COVER

por.met.1

4.90 €

100 % thermoplastic semiflexible plastic. It holds safely the octopus avoiding the entry of sand but guaranteeing an easy liberation in case of need.

En Stock

Available

ADAPTERS

Oxygen 300 bar NEVOC to DIN G 5/8" converter

1134+1080BHP

69.95 €

Oxygen 300 bar to DIN G 5/8" converter. Oxygen 300 bar female. NEVOC W30x2 Type 32 DIN G 5/8 female G 5/8"

Fuera de Stock

Ask us about availability

ADAPTERS

Oxygen Adapter NEVOC W30x2 300 Bar

nevocw30o2

45.00 €

Adapter for 300Bar Oxygen tanks, whose valve is specific of the Nevoc W 30x2 typeThis adapter has the W30x2 and G1 / 4 male connection to connect to different adapters.As a general rule, it´s needed this other part (the below link) to completely convert to a standard DIN connection. Link to Adapter G1 / 4 female to DIN 300 Bar

Fuera de Stock

Ask us about availability

REGULATOR ACCESORIES

Plug for first stage, HP & LP

2.11 €

Plugs for the High (HP) and Low (LP) outputs of the first stage regulator.HP, thread 7/16 "standardLP, thread 3/8 "standard Choose the model and the necessary units from the drop-down menu NOTE: THE PRICE IS UNITARY, THE PHOTO SHOWS THE TWO MODELS FROM DIFFERENT ANGLES ONLY AS ILLUSTRATION INFORMATION

Fuera de Stock

Ask us about availability

Gas fills, analysis & decanting

Prolonger hose

93.17 €

We have a DIN extension hose to facilitate the test of your regulator. Keep the vertical bottle while you submerge the equipment in a container with comfort. We have version DIN 200 and DIN 300 in measure standard of 2 meters (6.5 ft), but we can supply the measure you need.

Fuera de Stock

Ask us about availability

SPARE PARTS & EXTRAS

Seat Assembly

5.00 €

Depending on the type / brand / manufacturer of the tank valve, it will be needed one of the 4 shown in the photo. Choose the appropriate one for your tank valve from the drop-down menu.

En Stock

Available

Service kits and O-Rings

Small kit of O-Rings

int-kit-0001

12.10 €

A kit with the main diving O-rings that we may need at any time.It comes in a 5cm diameter can that will fit us anywhere.It has viton and standard O-Rings for: bottleneck, two-measure of DIN, for the HP hose, for the HP nipple, for the regulator hose (both terminals), a nipple for the HP gauge-hose and a schrader valve nipple for the inflator hose.

Showing 25-48 of 56 item(s)