DIVE GEAR

LIGHTING

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

FINS

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

STEEL HARDWARE

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

HEATING SYSTEMS

Transport bags

Hygiene and Care

Weight

Outlet

Tools

Face Mask

Miscellaneous

Compressors

En Stock

Available

ADAPTERS

Adapter G1 / 4 female to DIN 300 Bar

1080BHP

25.00 €

Adapter normally used to mount together with the one of the below link, to connection to tanks of Oxygen at 300Bar It has two female connections, DIN 300Bar and G1 / 4 Link to Oxygen Adapter NEVOC W30x2 300 Bar

En Stock

Available

BACKUP/HAND LIGHTS

Artek® Dolphin MK2

149.89 €

The diving light Dolphin MK2 is the smaller option of the ARTEK family.It has 550 lumen power output and a very high light penetration during immersion. It reaches the ipressive quantity of 20.500 lux at 1 meter. Two options available: Option 1: Only the dive light, transport bag and extra O-Ring as spare part.Option 2: All the above items + batterie and...

En Stock

Available

Artek

Artek® Megalodon Mk2

545.00 €

The primary light Megalodon mk2 is the evolution of the ARTEK®’s flagship. It has been designed to deliver 1280 lumens of light output with higher light penetration during immersion. The small size of the battery canister is impressive. New features to increase security to this high-end unit. Access to the complete technical specifications

Fuera de Stock

Ask us about availability

Artek

Artek® ORCA mk2

246.90 €

The diving flashlight ORCA mk2 is the ARTEK®’s more power of the hand lights of the brand. Designed with 1100 lumens of light output with higher light penetration during immersion. It´s able to produce 80.000 lux at 1 meter. Available in two options: Option 1: Only the dive light, transport bag and extra O-Ring as spare part. Option 2: All the above...

Fuera de Stock

Ask us about availability

Artek

Artek® Tigershark mk2

210.90 €

The dive light Tigershark mk2 is the intermediate model of the range products ARTEK®. It has 850 lumens of light output power with higher light penetration during immersion. Perfect compromise between power and size. Available in two options: Option 1: Only the dive light, transport bag and extra O-Ring as spare part. Option 2: All the above items +...

Fuera de Stock

-17.1%

Ask us about availability

Gas fills, analysis & decanting

Blending whip for O2

187.85 € 226.60 €

whip is fitted with a analog gauge and is complete with gas control valve and bleed screw to remove pressure when you need to remove the whip. The outlet connection is DIN 300Bar and the innlet connection can be directly DIN 300 or Nevoc O2 300Bar type to connect directly to the 300Bar Oxygen tanks without using an additional adapter.Choose the connection...

Fuera de Stock

-17.1%

Ask us about availability

Gas fills, analysis & decanting

Blending whip with Digital gauge

290.15 € 350.00 €

whip is fitted with a Digital gauge and is complete with gas control valve and bleed screw to remove pressure when you need to remove the whip. El latiguillo está cubierto de una malla metálica para garantizar su integridad y se puede pedir de 1m ó 2m The outlet connection is DIN 300Bar and the innlet connection can be directly DIN 300 or Nevoc O2 300Bar...

Fuera de Stock

-18%

Ask us about availability

Service kits and O-Rings

Complete O-Rings kit

jnt-box-0001

39.36 € 48.00 €

Complete kit with viton and standard O-Rings for: the neck of the tank, the HP nipples, for regulator hoses both terminals, for HP hoses, 2 sizes for regulator DIN connection, HP nipples, schrader valves for the inflator hose with its specific tool and 2 INT racors...

En Stock

Available

SPARE PARTS & EXTRAS

DIN To Yoke Tank Valve adapter

VLV-DIN-0001

2.20 €

Core for threading in G5/8" valves (DIN 232bar) and converting them to a YOKE connection

Fuera de Stock

Ask us about availability

inicio

Faber 15l tank 232Bar

285.00 €

Faber steel tank of 15 liters capacity with paint finish according to current Spanish regulations. Neck thread 25x2 flat (EN-144) Working pressure 232 Bar Empty weight (without boo and without valve): 17.4 kg Diameter: 203mm Height: 63cm Boot included

Fuera de Stock

Ask us about availability

Gas fills, analysis & decanting

Gas equalizer

91.42 €

Constructed of high pressure 5000 psi (350 bar) hose and made to equalize or fill one tank from another. Set up to equalize from the tank with highest pressure to the tank with the lowest pressure. Comes with bleeder valve to safely detach and ready to help make your scuba diving safe and fun. Is able to use with gas up to 40% of O2

Fuera de Stock

Ask us about availability

Gas fills, analysis & decanting

Gas equalizer with pressure gauge

118.99 €

Fuera de Stock

Ask us about availability

Pressure Gauge

GAUGE/CONSOLE COVERS

5.99 €

Mini pressure gauge protector. It can be use with Mini or stage SPG of brands such OMS, Metalsub, Halcyon, Apeks, Cressi ... Available in 3 colors, choose the one you need from the dropdown menu

Fuera de Stock

http://www.xdeep.eu/sidemount-butt-plate-beaver-tail-pr-19.html

Out-of-Stock

Accessories

http://www.xdeep.eu/sidemount-butt-plate-beaver-tail-pr-19.html

HA-017-0

44.00 €

Xdeep Sidemount butt-plate

View

Fuera de Stock

Ask us about availability

J.Dive HQ rubber hoses

J.Dive HP hoses

15.97 €

HP hoses manufactured with a somewhat harder rubber than the standard HP hoses available at the market. This offers a better resistance to abrasion and is especially indicated for users who use the equipment in a hard conditions. If you need any hose length not available in the drop-down menu, chose the next higher one and let us know the exact length...

Fuera de Stock

Ask us about availability

J.Dive HQ rubber hoses

J.Dive, regulator rubber hoses

13.31 €

Traditional rubber with brass fittings Length is measured from end to end of hose 3/8-inch male to 1st stage - 9/16-inch female to 2nd All hoses are Nitrox Ready

En Stock

-26%

Available

CONTROL INSTRUMENTS

Metalsub Gauge capsule diameter 50 mm

INS-SPR-0001

29.51 € 39.88 €

Pressure gauge capsule for stage tanks, thanks its small size is perfect for this use. Chromed brass body and highly resistant plastic glass. It is also the replacement for the pressure gauges mounted with a protector from Metalsub, Cressi, etc ...

En Stock

Available

Transport bags

Metalsub MAMMOTH DRY BOX 80 Liters

BOX-DRY-0080

62.99 €

The Metalsub Diving Box can be used to store and transport your scuba diving equipment before and after diving.

En Stock

-26%

Available

Pressure Gauge

Metalsub Nitrox pressure gauge 50mm

ins-spr-0010

29.51 € 39.88 €

Pressure gauge Oxygen compatible capsule for stage tanks, thanks its small size is perfect for this use. Chromed brass body and highly resistant plastic glass. It is also the replacement for the pressure gauges mounted with a protector from Metalsub, Cressi, etc ...

En Stock

-20%

Available

CONTROL INSTRUMENTS

Metalsub Pressure gauge with hose

INS-MAN-0001

55.43 € 69.28 €

Metalsub Pressure gauge with 80cm hose and protector.Chromed brass body and highly resistant plastic glass.

En Stock

-32.12%

Available

CONTROL INSTRUMENTS

Metalsub TECH Gauge Tempered Glass.

INS-MAN-0100

43.99 € 64.81 €

This pressure gauge is intendeed-ideal for stage tanks, thanks its small size is perfect for this use. It has been reinforced at the front part with an extra metal cover and a highly resistant Tempered glass. This pressure gauge will resits the hardest use we can give it.

En Stock

-25%

Available

CONTROL INSTRUMENTS

Mini gauge Metalsub

INS-MIN-0001

14.99 € 19.99 €

Metalsub Pony Gauge with BAR and PSI scale, designed to be installed directly in the first stage, it has a 7/16 UNF thread, the standard pressure gauge thread.

Fuera de Stock

Ask us about availability

SPARE PARTS & EXTRAS

Neck Tank M25 O-Ring

1.00 €

Tank neck O-Ring available in two options: Option 1: standard Option 2: Viton O2 compatible

En Stock

Available

Service kits and O-Rings

O-Ring for 3/8" hose

J. Dive 3/8"

1.50 €

4 O-Rings for the 3/8 "terminal of the low / medium pressure hose (the O-Ring that goes into the terminal of the regulator and inflator hoses that enters the 1st stage)

En Stock

Available

Service kits and O-Rings

O-Ring for 9/16" hose

J.Dive 9/16"

1.50 €

4 O-Rings for the 9/16" terminal of the regulator hose (the O-Ring that goes into the terminal of the regulator hose that enters the 2nd stage) 4 units

En Stock

Available

Service kits and O-Rings

O-Ring for HP hose (7/16")

J.Dive 7/16"

1.50 €

4 O-Rings for the 7/16" terminal of the HP hose (the O-Rings that goes into the high pressure hose terminal that enters the 1st stage) 4 units

En Stock

Available

Service kits and O-Rings

O-Rings for the pressure gauge nipple

J.Dive juntas vástago

1.50 €

4 O-Rings for the pressure gauge nipple

Fuera de Stock

Out-of-Stock

Miscellaneous

OCTOPUS MOUTHPIECE COVER

por.met2

3.55 €

100 % thermoplastic semiflexible plastic. It holds safely the octopus avoiding the entry of sand but guaranteeing an easy liberation in case of need.

View

En Stock

Available

Miscellaneous

OCTOPUS MOUTHPIECE COVER

por.met.1

4.90 €

100 % thermoplastic semiflexible plastic. It holds safely the octopus avoiding the entry of sand but guaranteeing an easy liberation in case of need.

En Stock

Available

ADAPTERS

Oxygen 300 bar NEVOC to DIN G 5/8" converter

1134+1080BHP

69.95 €

Oxygen 300 bar to DIN G 5/8" converter. Oxygen 300 bar female. NEVOC W30x2 Type 32 DIN G 5/8 female G 5/8"

Fuera de Stock

Ask us about availability

ADAPTERS

Oxygen Adapter NEVOC W30x2 300 Bar

nevocw30o2

45.00 €

Adapter for 300Bar Oxygen tanks, whose valve is specific of the Nevoc W 30x2 typeThis adapter has the W30x2 and G1 / 4 male connection to connect to different adapters.As a general rule, it´s needed this other part (the below link) to completely convert to a standard DIN connection. Link to Adapter G1 / 4 female to DIN 300 Bar

Fuera de Stock

Ask us about availability

REGULATOR ACCESORIES

Plug for first stage, HP & LP

2.11 €

Plugs for the High (HP) and Low (LP) outputs of the first stage regulator.HP, thread 7/16 "standardLP, thread 3/8 "standard Choose the model and the necessary units from the drop-down menu NOTE: THE PRICE IS UNITARY, THE PHOTO SHOWS THE TWO MODELS FROM DIFFERENT ANGLES ONLY AS ILLUSTRATION INFORMATION

Fuera de Stock

Ask us about availability

Gas fills, analysis & decanting

Prolonger hose

93.17 €

We have a DIN extension hose to facilitate the test of your regulator. Keep the vertical bottle while you submerge the equipment in a container with comfort. We have version DIN 200 and DIN 300 in measure standard of 2 meters (6.5 ft), but we can supply the measure you need.

Fuera de Stock

Ask us about availability

SPARE PARTS & EXTRAS

Seat Assembly

5.00 €

Depending on the type / brand / manufacturer of the tank valve, it will be needed one of the 4 shown in the photo. Choose the appropriate one for your tank valve from the drop-down menu.

En Stock

Available

Service kits and O-Rings

Small kit of O-Rings

int-kit-0001

12.10 €

A kit with the main diving O-rings that we may need at any time.It comes in a 5cm diameter can that will fit us anywhere.It has viton and standard O-Rings for: bottleneck, two-measure of DIN, for the HP hose, for the HP nipple, for the regulator hose (both terminals), a nipple for the HP gauge-hose and a schrader valve nipple for the inflator hose.

Fuera de Stock

Ask us about availability

SPARE PARTS & EXTRAS

Sparepart Set (for all valves)

15.00 €

Depending on the type / brand / manufacturer of the valve, one of the 3 shown in the photo will be needed.They are also available with classic or Viton O-rings.Choose the appropriate type and material from the drop-down menus.

Showing 1-36 of 70 item(s)