Spare parts

En Stock

-10%

Available

Sergi Escandell

Apek gasket Connector

BC911376

3.27 € 3.63 €

O-ring for Apeks Wings Elbow Seat

Fuera de Stock

-10%

Ask us about availability

Spare parts

Apeks corrugated hose

15.25 € 16.94 €

Apeks Corrugated Hose Corrugated hose for Apeks Wings. Available in two lengths: 42cm (16") 47cm (18")

Fuera de Stock

-10%

Out-of-Stock

Sergi Escandell

Apeks elbow with dump valve

3.76 € 4.17 €

Spare parts for Apeks elbow with bleed for Apeks WTX and PSD wings.Choose the necessary part from the drop-down menu according to the numbering marked in the drawing

View

Fuera de Stock

-10%

Ask us about availability

Sergi Escandell

Apeks end inflator mouthpiece

15759

4.68 € 5.20 €

Mouthpiece for the end inflator of the Apeks wings.

Fuera de Stock

-10%

Out-of-Stock

Sergi Escandell

Apeks Inflator Insert Module

BC911184

33.54 € 37.27 €

View

Fuera de Stock

-10%

Out-of-Stock

Sergi Escandell

Apeks Inflator Insert Module

BC911194

26.10 € 29.00 €

View

En Stock

Apeks Set Screws-Bolts kit for Pocket (WSX)

-10%

Available

Spare parts

Apeks Set Screws-Bolts kit for Pocket (WSX)

BT115136

18.00 € 20.00 €

APEKS Bolt/Nut 5 Pack for Pockets: Unparalleled Versatility, Modular Nature of System Full Range of TEK Accessories Designed to Complement WTX Range Can Be Attached to WTX System Fits: APEKS WTX Harness Attaches APEKS WTX Pockets to Harness APEKS Removable Trim Weight Pockets APEKS WTX TEK Thigh Pocket APEKS WTX BC Pocket Cargo Easy to install Durable...

Fuera de Stock

-10%

Ask us about availability

Sergi Escandell

Apeks wings screw Set

BT115119

29.62 € 32.91 €

Apeks screw set for mounting wing gears (accopling wing to backplate). Made of stainless steel, they have a 20mm long screw. The inner faces of the threads have a rubber gasket that prevents them from unscrewing by themselves. Widths can be set from 25mm to 16mm. The minimum width they reach is 11mm but from 16 onwards, the stud protrudes from the rear.

Fuera de Stock

Ask us about availability

BUNGEE MOUNTS/COMPASS

BUNGEE in 4, 5, 6 and 8mm

1.36 €

Price per meter

En Stock

Available (48-72h)

Spare parts

Combi Inflator tool

DT-20

9.52 €

Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves

En Stock

Available

Spare parts

Complete elbow assembly

A11918022

24.00 €

Complete elbow kit for OMS wings manufactured before 2015, Halcyon manufactured before 2018 and many other brands such as Xdeep, Dive Rite, Hollis, Tecline, Hog, EDGE ... Ask us if you have any questions-doubts about compatibility with your wing gear

Fuera de Stock

Ask us about availability

Spare parts

Corrugated hose

18.15 €

This corrugated hose is used to connect the BC to the power inflator. These standard corrugated hoses are compatible with both wings and regular BCs. This hose is perfect as a spare, especially for brands like:OMS, Halcyon, Dive Rite, xDEEP, IST, Hollis… and more brands…. Choose your size: Option 1: 32,5cm (13") Option 2: 40cm (16") Option 3: 48cm (19")

En Stock

Available

Spare parts

Corrugated hose 340 mm DIR

DTD 3421

16.44 €

340mm corrugated windpipe much softer than other standard ones. This allows it to better adapt to the necessary curves it takes on the way from the wing elbow to the inflator end.

En Stock

Available

CRESSI

Cressi direct system O-Ring kit

EIZ 750080

7.26 €

O-Ring kit for the maintenance of the Cressi Direct System inflator

En Stock

Available

Spare parts

Double Gasket

A11918020

3.99 €

Fuera de Stock

Ask us about availability

Spare parts

DTD Corrugated hose

18.15 €

Corrugated Hose Corrugated Hose in three differents sizes: option 1: 380mm Option 2: 400mm Option 3: 600mm These hoses work with these brands: DTD, ATS, Golem, DUX, Dir Zone.

En Stock

Available

Spare parts

DTD Inflator - end-piece J01

DTD 3422

41.96 €

The J01 Raw power has an improved piston-based system, highly sensitive and gradual, specifically designed for technical/professional use and addressing the needs of technical diving where compliance with the highest standards is a must.

En Stock

Spare parts

DTD inflator end piece X01K

DTD 3401

36.88 €

En Stock

Available

DTD

DTD PA webbing 50 mm - 4 m

DTD 2105

17.10 €

Special-made, hard, very resistant strap for backplate with a grommet for a screw.

Fuera de Stock

Ask us about availability

DTD

DTD Weight inner pocket DOWN-DROP

13.31 €

This is the spare part for the dropdown weight pocket system. There are 2 options: Big:: can carry 2 pcs of standard sized 1,5-2 kg lead blocks. Small: can carry one piece of standard sized 1,5-2 kg lead block.

Fuera de Stock

Ask us about availability

Spare parts

Elbow Assembly with OVP with cable

30.99 €

Elbow Assembly with OVP with cable suitable. There are lenght option for the cable: 33cm 40cm 48cm

En Stock

Available

Spare parts

Elbow O-Ring

DTD-Jun-Cod

3.00 €

Elbow O-Ring for DTD wings.

En Stock

Available

Spare parts

Elbow O-Ring

1.20 €

Replacement O-ring for the trachea elbow. OPTION 1: Wings manufactured after 2015. (Dimensions: outside 38mmø, inside 25mmø and 3.8mm thick) OPTION 2: Wings manufactured before 2015 and also for Halcyon, Dive Rite, IST, Xdeep, Hollis, EDGE, HOG ... (Dimensions: Outside 38mmø, Inside 25mmø, and 3mm thick) Choose the appropriate one you need from the...

En Stock

Available

Spare parts

Elbow OMS (newest version)

A11918023

6.50 €

The newly designed OMS elbow can be used in any wing of the most common such as, obviously, all OMS, halcyon, Edge, Xdeep, Dive Rite, etc ... if you have any questions, ask us. To this new design has been added a very marked stretch mark, in this way the trachea is much more secured once installed and even losing the flange it is highly unlikely that the...

En Stock

Available

Spare parts

EPDM Rubber Band for Harness

A11918011

2.00 €

En Stock

Available

Spare parts

Halcyon 90-Degree Elbow for Wing

14.070.014

17.77 €

Halcyon Elbow (Wing/Corrugated Hose) suitable for all Halcyon Wings.The elbow is the connection between the wing and the corrugated hose.Halcyon Elbow (Wing/Corrugated Hose)- Connection between wing und corrugated hose- Suitable for all Halcyon wings- 90 degree elbow- Scope of delivery: elbow, union nut with thread, gasket

Fuera de Stock

Halcyon Stainless Steel Halycon weight belt buckle

Ask us about availability

Spare parts

Halcyon Stainless Steel Halycon weight belt buckle

62040010

24.00 €

Fuera de Stock

Ask us about availability

Hollis

Hollis complete inflator system

75.00 €

Complete inflation system for Hollis wings, consisting of elbow with female thread and gasket, trachea and inflator end. Available in three sizes: 33cm 41cm 48cm Choose the appropriate one from the drop-down menu

En Stock

Available

Spare parts

inflator - end-piece X01

DTD 3400

41.96 €

Fuera de Stock

inflator-knee-joint-with-screwed-fitting

inflator-knee-joint-with-screwed-fitting 2

On sale!

Out-of-Stock

Spare parts

inflator - knee joint with screwed fitting

XS-XDX-IN-EL-BW

23.20 €

Complete elbow that includes (have a look to the photo): The elbow, the fixing ring of the same, the outer joint of the base of the elbow, the internal thread, the intermediate thread and the double joint Suitable for the following marks: OMS manufactured before 2015, Hollis, Halcyon, Edge, Xdeep, Tecline, Dive Rite*, Hog Dive Rite wings may not fit...

View

Fuera de Stock

Ask us about availability

Spare parts

inflator - knee joint with screwed fitting

DTD-3406

12.36 €

DTD, inflator - knee joint with screwed fitting

En Stock

Available

Spare parts

inflator - safety valve 1,4 (OPV)

DTD-3407

12.44 €

DTD, inflator - safety valve 1,4 (OPV)

En Stock

Available

Spare parts

inflator - screw outlet flange

DTD-3409

12.68 €

DTD, inflator - screw outlet flange

Fuera de Stock

Ask us about availability

Spare parts

Inflator service kit

sfinfserv

12.00 €

Service kit for DTD X01K, X01 and Scuba Force inflator controls

Fuera de Stock

Out-of-Stock

Spare parts

Inflator valve tool

IVRT

4.78 €

This product is a tool for the removal and adjustment of the schraider valve within our inflator hoses. This assists in allowing you to remove and replace them as required during servicing.This is a useful tool for the experienced diver and service engineer; a simple and small tool engineered in metal for durability.

View

En Stock

Available

Spare parts

Inner coupling

A11918021

4.99 €

Male piece that goes inside the wing, which serves to anchor both the elbow system and the exhaust / drain valve.

Fuera de Stock

Ask us about availability

Spare parts

Male nipple

303046

7.00 €

Male nipple for wing inflator end piece

Fuera de Stock

OMS Peformance Internal Bladder Mono wings

Ask us about availability

Spare parts

OMS Peformance Internal Bladder Mono wings

60.80 €

Inner blade for wings manufactured after 2015 Choose the one you need from the dropdown menu

Fuera de Stock

Ask us about availability

Spare parts

OMS Complete Elbow Assembly + 2015

21.30 €

To use on wings manufactured after 2015

Fuera de Stock

Ask us about availability

Spare parts

OMS complete wing inflator kit

69.90 €

Completed airway (to use with OMS wings manufactured after 2015): elbow, corrugated hose , inflator and gasket 13", 16" oder 19" Länge

En Stock

OMS Donut Shape Internal Bladder (32 lb.)

OMS Donut Shape Internal Bladder (32 lb.) 2

Available

Spare parts

OMS Donut Shape Internal Bladder (32 lb.)

A11918038

60.60 €

Inner bladder to use as spare part with OMS Performance mono wings manufactured before 2015

En Stock

Available

Spare parts

OMS elbow

A11918023

4.80 €

This elbow fits in a lot of different wing type, like old OMS and new ones, Halcyon, Dive Rite, Hollis, IST, HOG, EDGE, etc... Link to the available product

En Stock

Available

Spare parts

OMS Elbow collar/cap

A11918025

3.80 €

Elbow collar/cap to use with OMS wings manufactured before 2015. It also works with many other different wings brands, like: Halcyon, Dive Rite, IST, Hollis, HOG, EDGE, etc...

En Stock

Available

Spare parts

OMS inflator end

a11918013

36.80 €

OMS 45º inflator end. Fits most BCDs on the market that require a 1in inner diameter corrugated hose. Also has a steel pin for BCDs that use a pull to dump feature. Sleek streamlined design replacement power inflator for your BC compatible with most 1″ corrugated hoses

En Stock

Available

Spare parts

OMS OPV cap

A11918030

3.99 €

Over pressure valve cap to use with OMS wings manufactured before 2015. It also works with many other different wings brands, like: Halcyon, Dive Rite, IST, Hollis, HOG, EDGE, etc...

En Stock

Available

Spare parts

OMS Over pressure valve

A11918017

14.30 €

This spare part is only able to use in OMS wings manufactured after 2015

Fuera de Stock

Ask us about availability

Spare parts

OMS Peformance Internal Bladder Double

62.50 €

Inner blade for wings manufactured after 2015 Choose the one you need from the dropdown menu

Fuera de Stock

OMS Replacement Inner Pocket ballast system

OMS Replacement Inner Pocket ballast system 2

Ask us about availability

OMS

OMS Replacement Inner Pocket ballast system

A11918093

13.99 €

Replacement inner pocket of the vertical OMS ballast system >2018The price is only for the replacement of the inner pocket, the pocket itself that can be seen in the 2nd photo is not included

En Stock

Available

Spare parts

OMS® Complete Over Pressure valve

a11918026

16.00 €

Complete overpressure valve (except the male part inside the bladder, not included) for OMS® wings manufactured before 2015.This valve is the universal type one, are also valid / suitable for and are suitable for a multitude of brands such as Halcyon, EDGE, Dive Rite, Xdeep, etc ... get in touch with us is you could have any doubt about compatibility.

En Stock

Available

Spare parts

OPV retainer

A11918028

1.99 €

Over pressure seat retainer to use with OMS wings manufactured before 2015. It also works with many other different wings brands, like: Halcyon, Dive Rite, IST, Hollis, HOG, EDGE, etc..

En Stock

Available

Spare parts

OPV Seat

A11918027

1.94 €

The OMS O-Ring (to use with OMS wings manufactured before 2015) is for use in the over pressure valve of the wings, however, its also works with these other brands: Halcyon, Dive Rite, IST, Xdeep, Hollis, EDGE, HOG...

En Stock

Available

Spare parts

OPV valves spring type 1

A11918029

0.79 €

This is the spring which is located at the over pressure valves and elbow of the wings This spring has the same diameter at both sides, up and down, 24mm

En Stock

Available

Spare parts

OPV valves spring type 2

legacy parts

0.60 €

This is the spring which is located at the over pressure valves and elbow of the wings This spring is asymmetric, one side has 22mm of diameter and the other one 17mm of diameter

En Stock

Spare parts

Plug DTD for inflator/OPV opening

DTD 3410

12.90 €

DTD blind plug for the overpressure outlets of the wings: DTD, ATS, Golem, DIR Zone, Scuba Force

En Stock

Available

Spare parts

Pull ball - non-floatable

DTD 3411

6.66 €

Handle to mount on the drain / overpressure valves (OPV) of the wings and / or jackets.

En Stock

Available

Spare parts

Rubber bands kit for harness cinch

SFSCHW

8.00 €

Kit consisting of 6 bands of bungee type fabric for use in the harness, either to hold the backup flashlight, or the remaining strap.Much more comfortable and easy to handle than the classic rubber bands

En Stock

Available

Spare parts

Rubber O-ring to fix the inflator hose

A11918012

4.99 €

Rubber O-ring to fix the inflator on left chest D-ring

En Stock

Available

Spare parts

Rubber ring for harness and D-Ring

A11918092

3.99 €

Rubber Ring with 8,0 mmø section, 50mm outer diameter and 85mm inner diameter.This ring is used in OMS wing equipment to keep the D-Rings of the pockets in a 90º position. It is also used in harnesses to stop different elements that we have mounted.

En Stock

Available

Spare parts

Seal Ring

A11918019

5.99 €

Sel Ring for OMS wing manufactured before 2015. Also fits in: Halcyon, IST, Hollis, Dive Rite, etc... if you have any doubt regarding the adaptability, please, contact us.

En Stock

Available

Spare parts

Sitech String Dump Valve

13350WN

34.00 €

Spring loaded Dump Valve with twin check valves and cord. Intended for use in inflatable units such as rebreathers, lift bags, BCD´s etc. Double check valves reduce water intrusion to a minimum. A moving pressure plate prevents the check valve from tacking to the spring retainer when dumping manually.This Dump Valve is designed to be fitted in a Weld nut.

En Stock

Available

Spare parts

Slide Tri Glide

SFSTG

9.90 €

Slide tri glide for 50mm webbing.It can be use for different applies, one of them and the most demanding is mounting it on the back of the back plate, making the cinch able to run over it and making the harness infinitely adjustable.

Showing 1-61 of 61 item(s)