DIVE GEAR

LIGHTING

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

FINS

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

STEEL HARDWARE

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

HEATING SYSTEMS

Transport bags

Hygiene and Care

Weight

Outlet

Tools

Face Mask

Miscellaneous

Compressors

Fuera de Stock

-10%

Ask us about availability

Steel Tanks

12 LITERS LONG TANK

208.80 € 232.01 €

12 LITERS LONG TANK Height: 690mmDiameter: 171mmWeight: between 14.5kgStep threaded neck: 25 x 2Capacity: 12 litersWorking pressure: 232barLoad capacity: 2784 liters PLEASE, ASK US FOR THE SPECIAL SHIPMENT CONDITIONS

Fuera de Stock

-10%

Ask us about availability

Steel Tanks

12 LITERS TANK, CONCAVE BASE

218.70 € 243.00 €

12 liters concave base BTS 12 liter tank long and concave base. Height: 685mm Diameter: 171mm Weight: between 14.8 and 15.10 kg Step threaded neck: 25 x 2 Capacity: 12 liters Working pressure: 232bar Load capacity: 2784 liters PLEASE, ASK US FOR THE SPECIAL SHIPMENT CONDITIONS

Fuera de Stock

Ask us about availability

DRYSUIT INFLATOR SYSTEMS

1st stage with 4 LP connections

A13110601

86.00 €

Unbalanced 1st Stage, DIN, 300 bar; G5/8" thread, 300 bar, 1 HP port and 4 LP ports

Fuera de Stock

Ask us about availability

Steel Tanks

3 liters 300Bar, 100mm ø

126.00 €

3 litre steel Euro cylinder, 300Bar and 100mm ø Ideal for rebreather divers and pony bottles. Manufacturer: BtS-Eurocylinders Working pressure: 300Bar Test pressure: 450Bar Weight: 4.97kg Diameter: 100mm Height: 520mm Neck: 25x2 EN-144 FLAT

Fuera de Stock

Ask us about availability

Steel Tanks

3 liters tank, 114mm

143.00 €

Manufacturer: BtS-EurocylindersWorking pressure: 232BarTest pressure: 450BarWeight: 5.2kgDiameter: 114mmHeight: 420mmNeck: 25x2 EN-144 FLAT

En Stock

-16%

Available

COMPLEMENTS

4,2Kg, P-Weight

A21299905

87.36 € 104.00 €

P-Weights are directly screwed in the groove of the backplate and provide a perfectly centers weighting very close to the body. Weight 4,2kg Coated

Fuera de Stock

-10%

Ask us about availability

TWIN TANKS

8,5 twin tanks concave base

681.30 € 757.00 €

En Stock

-10%

Available

Sergi Escandell

Apek gasket Connector

BC911376

3.27 € 3.63 €

O-ring for Apeks Wings Elbow Seat

Fuera de Stock

-12%

Ask us about availability

TWIN TANKS

Apeks 12 Litre Twinset

TK9223012

837.47 € 951.67 €

The Apeks bottle is assembled with one of the softest, and durable/resistant to the hard use of diving, valves available on the market. NOTE: Apeks twin tanks can be ordered with a concave or classic convex (round) base. Choose the desired one from the drop-down menu.

En Stock

-10%

Spare parts and kits

Apeks 1st stage valve seat

rg912114

23.79 € 26.44 €

Valve seat for Apeks removable seat first stages

En Stock

-10%

Available

Spare parts and kits

Apeks 2nd stage adjusting screw

RG912087

13.88 € 15.43 €

Adjusting screw for ATX20, ATX40, XTX20 and XTX40 second stages

En Stock

Available

inicio

Apeks 2nd stage Spindle Collar

rg912392

7.14 €

Apeks 2nd stage Spindle Collar Useable on XTX, ATX and MTX 2nd stages. The price is only for the plastic piece.

En Stock

-20%

Backpacks

Apeks 30L Dry Bag

BA1901001

72.00 € 90.00 €

Not just a dive bag, the Apeks 30L dry rucksack is your new everyday bag. A roll top closure will keep your belongings dry, whether you are on the back of a boat or commuting home. The large dry compartment has a dedicated padded laptop sleeve and the front of the bag has an easy to access water-resistant pocket. With a fully vented back and shoulder...

En Stock

Apeks 5th port for FSR and FST 1st stages

-10%

Available

Spare parts and kits

Apeks 5th port for FSR and FST 1st stages

RA117114

32.40 € 36.00 €

An upgrade kit with the DST (XTX50) First stage of Apeks can be extended by a further means pressure outlet. This is then located on top of the rotary distributor block, allowing an even better hose configuration. In this kit, all seals, as well as an illustrated manual (English) are included. This kit MUST NOT be retro-fit to any older 1st stage valve....

En Stock

-20%

Available

APEKS

Apeks AT Stage 3 with Octopus

rq111111

303.20 € 379.00 €

Before the XTX range of regulators came along, the ATX models ruled the seas. The ATX is still available today and offers a fully balanced first and second stage with cold water capability (can be used in all temperatures including those below 10 C / 50 F).

Fuera de Stock

-30%

Out-of-Stock

APEKS

Apeks AT Stage4 Set DIN

RC122116

335.30 € 479.00 €

Before the XTX range of regulators came along, the ATX and AT models ruled the seas. The AT and ATX is still available today and offers a fully balanced first and second stage with cold water capability (can be used in all temperatures including those below 10 C / 50 F).

View

En Stock

-10%

Available

Spare parts and kits

Apeks ATX / XTX Diaphragm Assy

RG912123

15.25 € 16.94 €

Main diaphragm of the second stages Apeks XTX, AT and ATX all versions

En Stock

-18%

Available

APEKS

Apeks ATX Stage 3 DIN

RQ112111

351.78 € 429.00 €

Fuera de Stock

-26%

Out-of-Stock

APEKS

Apeks ATX40 second stage

RS112114-B

125.06 € 169.00 €

This octopus is based upon the ATX second stage with proven cold water capability and the performance you would expect from an Apeks pneumatically balanced valve. It features a diver-adjustable venturi control, a high visibility yellow front cover, yellow accent pieces and a 36” yellow hose.

View

Fuera de Stock

-40%

Out-of-Stock

Apeks complete wings gear

Apeks Black Ice

419.40 € 699.00 €

The Apeks Black Ice is a rugged, weight-integrated, back inflation BCD designed with the advanced diver in mind. It crosses over nicely to many technical, military and public safety applications. Despite its heavy duty construction, it provides amazing comfort, fit and stability thanks to its Wrapture Harness System. Due to the modular nature of this BC,...

View

En Stock

-10%

available

CONTROL INSTRUMENTS

Apeks Bungee Mount Compass

NS127111

67.50 € 75.00 €

The Apeks Bungee Compass is a wrist mounted compass. An elasticated strap will hold it securely in place even when your wetsuit or drysuit compresses at depth.

Fuera de Stock

-10%

Ask us about availability

Spare parts

Apeks corrugated hose

15.25 € 16.94 €

Apeks Corrugated Hose Corrugated hose for Apeks Wings. Available in two lengths: 42cm (16") 47cm (18")

Fuera de Stock

-20%

Out-of-Stock

APEKS

Apeks DB4 First stage M26 Nitrox/O2

RT111114

199.20 € 249.00 €

100% O2 clean DB4 First Stage from Apeks is designed with the cold-water exploration diver in mind. This is the latest cold-water innovation, an over-moulded first stage endcap that reduces ice build-up around the first stage. This technology greatly reduces the risk of a free flow in low temperatures. Cold water performance is further improved by heat...

View

Fuera de Stock

Apeks DIN 300Bar or M26 connection screw.

Apeks DIN 300Bar or M26 connection screw. 2

-20%

Product available with different options

Spare parts and kits

Apeks DIN 300Bar or M26 connection screw.

28.00 € 35.01 €

Apeks DIN 300Bar or M26 connection screw. DIN 300Bar connections are available in three options: Option 1: Glossy finish Option 2: Matte finish Option 3: Rubberized finish Option 4 corresponds to the M26 connection for Nirox and / or Oxygen. The new model is totally metal, see the attached picture Choose the appropriate one from the drop-down menu

View

Showing 1-24 of 273 item(s)