DIVE GEAR

LIGHTING

JACKETS

REGULATORS

BACKPLATES/WINGS

SUITS

Sidemount/Caving

FINS

MASK

COMPUTERS

REGULATOR HOSE (Rubber & Miflex)

CONTROL INSTRUMENTS

DECO ESSENTIALS

REELS, WETNOTES, BUOYS...

Knifes & Cutters

BUNGEE MOUNTS/COMPASS

Sealing systems

DRYSUIT INFLATOR SYSTEMS

TANKS/VALVES

STEEL HARDWARE

pee-valve, condoms, quick connec

Gas fills, analysis & decanting

ANALYZERS

ADAPTERS

HEATING SYSTEMS

Transport bags

Hygiene and Care

Weight

Outlet

Tools

Face Mask

Miscellaneous

Compressors

En Stock

Available

ADAPTERS

Adapter G1 / 4 female to DIN 300 Bar

1080BHP

25.00 €

Adapter normally used to mount together with the one of the below link, to connection to tanks of Oxygen at 300Bar It has two female connections, DIN 300Bar and G1 / 4 Link to Oxygen Adapter NEVOC W30x2 300 Bar

Fuera de Stock

-17.1%

Ask us about availability

Gas fills, analysis & decanting

Blending whip for O2

187.85 € 226.60 €

whip is fitted with a analog gauge and is complete with gas control valve and bleed screw to remove pressure when you need to remove the whip. The outlet connection is DIN 300Bar and the innlet connection can be directly DIN 300 or Nevoc O2 300Bar type to connect directly to the 300Bar Oxygen tanks without using an additional adapter.Choose the connection...

Fuera de Stock

-17.1%

Ask us about availability

Gas fills, analysis & decanting

Blending whip with Digital gauge

290.15 € 350.00 €

whip is fitted with a Digital gauge and is complete with gas control valve and bleed screw to remove pressure when you need to remove the whip. El latiguillo está cubierto de una malla metálica para garantizar su integridad y se puede pedir de 1m ó 2m The outlet connection is DIN 300Bar and the innlet connection can be directly DIN 300 or Nevoc O2 300Bar...

Fuera de Stock

-18%

Ask us about availability

Service kits and O-Rings

Complete O-Rings kit

jnt-box-0001

39.36 € 48.00 €

Complete kit with viton and standard O-Rings for: the neck of the tank, the HP nipples, for regulator hoses both terminals, for HP hoses, 2 sizes for regulator DIN connection, HP nipples, schrader valves for the inflator hose with its specific tool and 2 INT racors...

En Stock

Available

SPARE PARTS & EXTRAS

DIN To Yoke Tank Valve adapter

VLV-DIN-0001

2.20 €

Core for threading in G5/8" valves (DIN 232bar) and converting them to a YOKE connection

Fuera de Stock

Ask us about availability

Gas fills, analysis & decanting

Gas equalizer

91.42 €

Constructed of high pressure 5000 psi (350 bar) hose and made to equalize or fill one tank from another. Set up to equalize from the tank with highest pressure to the tank with the lowest pressure. Comes with bleeder valve to safely detach and ready to help make your scuba diving safe and fun. Is able to use with gas up to 40% of O2

Fuera de Stock

Ask us about availability

Gas fills, analysis & decanting

Gas equalizer with pressure gauge

118.99 €

Fuera de Stock

Ask us about availability

Pressure Gauge

GAUGE/CONSOLE COVERS

5.99 €

Mini pressure gauge protector. It can be use with Mini or stage SPG of brands such OMS, Metalsub, Halcyon, Apeks, Cressi ... Available in 3 colors, choose the one you need from the dropdown menu

Fuera de Stock

Ask us about availability

J.Dive HQ rubber hoses

J.Dive HP hoses

15.97 €

HP hoses manufactured with a somewhat harder rubber than the standard HP hoses available at the market. This offers a better resistance to abrasion and is especially indicated for users who use the equipment in a hard conditions. If you need any hose length not available in the drop-down menu, chose the next higher one and let us know the exact length...

Fuera de Stock

Ask us about availability

J.Dive HQ rubber hoses

J.Dive, regulator rubber hoses

13.31 €

Traditional rubber with brass fittings Length is measured from end to end of hose 3/8-inch male to 1st stage - 9/16-inch female to 2nd All hoses are Nitrox Ready

En Stock

-26%

Available

CONTROL INSTRUMENTS

Metalsub Gauge capsule diameter 50 mm

INS-SPR-0001

29.51 € 39.88 €

Pressure gauge capsule for stage tanks, thanks its small size is perfect for this use. Chromed brass body and highly resistant plastic glass. It is also the replacement for the pressure gauges mounted with a protector from Metalsub, Cressi, etc ...

En Stock

Available

Transport bags

Metalsub MAMMOTH DRY BOX 80 Liters

BOX-DRY-0080

62.99 €

The Metalsub Diving Box can be used to store and transport your scuba diving equipment before and after diving.

En Stock

-26%

Available

Pressure Gauge

Metalsub Nitrox pressure gauge 50mm

ins-spr-0010

29.51 € 39.88 €

Pressure gauge Oxygen compatible capsule for stage tanks, thanks its small size is perfect for this use. Chromed brass body and highly resistant plastic glass. It is also the replacement for the pressure gauges mounted with a protector from Metalsub, Cressi, etc ...

En Stock

-20%

Available

CONTROL INSTRUMENTS

Metalsub Pressure gauge with hose

INS-MAN-0001

55.43 € 69.28 €

Metalsub Pressure gauge with 80cm hose and protector.Chromed brass body and highly resistant plastic glass.

En Stock

-32.12%

Available

CONTROL INSTRUMENTS

Metalsub TECH Gauge Tempered Glass.

INS-MAN-0100

43.99 € 64.81 €

This pressure gauge is intendeed-ideal for stage tanks, thanks its small size is perfect for this use. It has been reinforced at the front part with an extra metal cover and a highly resistant Tempered glass. This pressure gauge will resits the hardest use we can give it.

En Stock

-25%

Available

CONTROL INSTRUMENTS

Mini gauge Metalsub

INS-MIN-0001

14.99 € 19.99 €

Metalsub Pony Gauge with BAR and PSI scale, designed to be installed directly in the first stage, it has a 7/16 UNF thread, the standard pressure gauge thread.

Fuera de Stock

Ask us about availability

SPARE PARTS & EXTRAS

Neck Tank M25 O-Ring

1.00 €

Tank neck O-Ring available in two options: Option 1: standard Option 2: Viton O2 compatible

En Stock

Available

Service kits and O-Rings

O-Ring for 3/8" hose

J. Dive 3/8"

1.50 €

4 O-Rings for the 3/8 "terminal of the low / medium pressure hose (the O-Ring that goes into the terminal of the regulator and inflator hoses that enters the 1st stage)

En Stock

Available

Service kits and O-Rings

O-Ring for 9/16" hose

J.Dive 9/16"

1.50 €

4 O-Rings for the 9/16" terminal of the regulator hose (the O-Ring that goes into the terminal of the regulator hose that enters the 2nd stage) 4 units

En Stock

Available

Service kits and O-Rings

O-Ring for HP hose (7/16")

J.Dive 7/16"

1.50 €

4 O-Rings for the 7/16" terminal of the HP hose (the O-Rings that goes into the high pressure hose terminal that enters the 1st stage) 4 units

En Stock

Available

Service kits and O-Rings

O-Rings for the pressure gauge nipple

J.Dive juntas vástago

1.50 €

4 O-Rings for the pressure gauge nipple

Fuera de Stock

Out-of-Stock

Miscellaneous

OCTOPUS MOUTHPIECE COVER

por.met2

3.55 €

100 % thermoplastic semiflexible plastic. It holds safely the octopus avoiding the entry of sand but guaranteeing an easy liberation in case of need.

View

En Stock

Available

Miscellaneous

OCTOPUS MOUTHPIECE COVER

por.met.1

4.90 €

100 % thermoplastic semiflexible plastic. It holds safely the octopus avoiding the entry of sand but guaranteeing an easy liberation in case of need.

En Stock

Available

ADAPTERS

Oxygen 300 bar NEVOC to DIN G 5/8" converter

1134+1080BHP

69.95 €

Oxygen 300 bar to DIN G 5/8" converter. Oxygen 300 bar female. NEVOC W30x2 Type 32 DIN G 5/8 female G 5/8"

Showing 1-24 of 36 item(s)