Spare parts

En Stock

-10%

Available

Sergi Escandell

Apek gasket Connector

BC911376

3.27 € 3.63 €

O-ring for Apeks Wings Elbow Seat

Fuera de Stock

-10%

Ask us about availability

Spare parts

Apeks corrugated hose

15.25 € 16.94 €

Apeks Corrugated Hose Corrugated hose for Apeks Wings. Available in two lengths: 42cm (16") 47cm (18")

Fuera de Stock

-10%

Out-of-Stock

Sergi Escandell

Apeks elbow with dump valve

3.76 € 4.17 €

Spare parts for Apeks elbow with bleed for Apeks WTX and PSD wings.Choose the necessary part from the drop-down menu according to the numbering marked in the drawing

View

Fuera de Stock

-10%

Ask us about availability

Sergi Escandell

Apeks end inflator mouthpiece

15759

4.68 € 5.20 €

Mouthpiece for the end inflator of the Apeks wings.

Fuera de Stock

-10%

Out-of-Stock

Sergi Escandell

Apeks Inflator Insert Module

BC911184

33.54 € 37.27 €

View

Fuera de Stock

-10%

Out-of-Stock

Sergi Escandell

Apeks Inflator Insert Module

BC911194

26.10 € 29.00 €

View

En Stock

Apeks Set Screws-Bolts kit for Pocket (WSX)

-10%

Available

Spare parts

Apeks Set Screws-Bolts kit for Pocket (WSX)

BT115136

18.00 € 20.00 €

APEKS Bolt/Nut 5 Pack for Pockets: Unparalleled Versatility, Modular Nature of System Full Range of TEK Accessories Designed to Complement WTX Range Can Be Attached to WTX System Fits: APEKS WTX Harness Attaches APEKS WTX Pockets to Harness APEKS Removable Trim Weight Pockets APEKS WTX TEK Thigh Pocket APEKS WTX BC Pocket Cargo Easy to install Durable...

Fuera de Stock

-10%

Ask us about availability

Sergi Escandell

Apeks wings screw Set

BT115119

29.62 € 32.91 €

Apeks screw set for mounting wing gears (accopling wing to backplate). Made of stainless steel, they have a 20mm long screw. The inner faces of the threads have a rubber gasket that prevents them from unscrewing by themselves. Widths can be set from 25mm to 16mm. The minimum width they reach is 11mm but from 16 onwards, the stud protrudes from the rear.

Fuera de Stock

Ask us about availability

BUNGEE MOUNTS/COMPASS

BUNGEE in 4, 5, 6 and 8mm

1.36 €

Price per meter

En Stock

Available (48-72h)

Spare parts

Combi Inflator tool

DT-20

9.52 €

Tool to be able to disassemble the inflator end and perform its maintenance. The tool also incorporates the notches to disassemble the knobs of the tanks valves

En Stock

Available

Spare parts

Complete elbow assembly

A11918022

24.00 €

Complete elbow kit for OMS wings manufactured before 2015, Halcyon manufactured before 2018 and many other brands such as Xdeep, Dive Rite, Hollis, Tecline, Hog, EDGE ... Ask us if you have any questions-doubts about compatibility with your wing gear

Fuera de Stock

Ask us about availability

Spare parts

Corrugated hose

18.15 €

This corrugated hose is used to connect the BC to the power inflator. These standard corrugated hoses are compatible with both wings and regular BCs. This hose is perfect as a spare, especially for brands like:OMS, Halcyon, Dive Rite, xDEEP, IST, Hollis… and more brands…. Choose your size: Option 1: 32,5cm (13") Option 2: 40cm (16") Option 3: 48cm (19")

En Stock

Available

Spare parts

Corrugated hose 340 mm DIR

DTD 3421

16.44 €

340mm corrugated windpipe much softer than other standard ones. This allows it to better adapt to the necessary curves it takes on the way from the wing elbow to the inflator end.

En Stock

Available

CRESSI

Cressi direct system O-Ring kit

EIZ 750080

7.26 €

O-Ring kit for the maintenance of the Cressi Direct System inflator

En Stock

Available

Spare parts

Double Gasket

A11918020

3.99 €

Fuera de Stock

Ask us about availability

Spare parts

DTD Corrugated hose

18.15 €

Corrugated Hose Corrugated Hose in three differents sizes: option 1: 380mm Option 2: 400mm Option 3: 600mm These hoses work with these brands: DTD, ATS, Golem, DUX, Dir Zone.

En Stock

Available

Spare parts

DTD Inflator - end-piece J01

DTD 3422

41.96 €

The J01 Raw power has an improved piston-based system, highly sensitive and gradual, specifically designed for technical/professional use and addressing the needs of technical diving where compliance with the highest standards is a must.

En Stock

Spare parts

DTD inflator end piece X01K

DTD 3401

36.88 €

En Stock

Available

DTD

DTD PA webbing 50 mm - 4 m

DTD 2105

17.10 €

Special-made, hard, very resistant strap for backplate with a grommet for a screw.

Fuera de Stock

Ask us about availability

DTD

DTD Weight inner pocket DOWN-DROP

13.31 €

This is the spare part for the dropdown weight pocket system. There are 2 options: Big:: can carry 2 pcs of standard sized 1,5-2 kg lead blocks. Small: can carry one piece of standard sized 1,5-2 kg lead block.

Fuera de Stock

Ask us about availability

Spare parts

Elbow Assembly with OVP with cable

30.99 €

Elbow Assembly with OVP with cable suitable. There are lenght option for the cable: 33cm 40cm 48cm

En Stock

Available

Spare parts

Elbow O-Ring

DTD-Jun-Cod

3.00 €

Elbow O-Ring for DTD wings.

En Stock

Available

Spare parts

Elbow O-Ring

1.20 €

Replacement O-ring for the trachea elbow. OPTION 1: Wings manufactured after 2015. (Dimensions: outside 38mmø, inside 25mmø and 3.8mm thick) OPTION 2: Wings manufactured before 2015 and also for Halcyon, Dive Rite, IST, Xdeep, Hollis, EDGE, HOG ... (Dimensions: Outside 38mmø, Inside 25mmø, and 3mm thick) Choose the appropriate one you need from the...

En Stock

Available

Spare parts

Elbow OMS (newest version)

A11918023

6.50 €

The newly designed OMS elbow can be used in any wing of the most common such as, obviously, all OMS, halcyon, Edge, Xdeep, Dive Rite, etc ... if you have any questions, ask us. To this new design has been added a very marked stretch mark, in this way the trachea is much more secured once installed and even losing the flange it is highly unlikely that the...

En Stock

Available

Spare parts

EPDM Rubber Band for Harness

A11918011

2.00 €

En Stock

Available

Spare parts

Halcyon 90-Degree Elbow for Wing

14.070.014

17.77 €

Halcyon Elbow (Wing/Corrugated Hose) suitable for all Halcyon Wings.The elbow is the connection between the wing and the corrugated hose.Halcyon Elbow (Wing/Corrugated Hose)- Connection between wing und corrugated hose- Suitable for all Halcyon wings- 90 degree elbow- Scope of delivery: elbow, union nut with thread, gasket

Fuera de Stock

Halcyon Stainless Steel Halycon weight belt buckle

Ask us about availability

Spare parts

Halcyon Stainless Steel Halycon weight belt buckle

62040010

24.00 €

Fuera de Stock

Ask us about availability

Hollis

Hollis complete inflator system

75.00 €

Complete inflation system for Hollis wings, consisting of elbow with female thread and gasket, trachea and inflator end. Available in three sizes: 33cm 41cm 48cm Choose the appropriate one from the drop-down menu

En Stock

Available

Spare parts

inflator - end-piece X01

DTD 3400

41.96 €

Fuera de Stock

inflator-knee-joint-with-screwed-fitting

inflator-knee-joint-with-screwed-fitting 2

On sale!

Out-of-Stock

Spare parts

inflator - knee joint with screwed fitting

XS-XDX-IN-EL-BW

23.20 €

Complete elbow that includes (have a look to the photo): The elbow, the fixing ring of the same, the outer joint of the base of the elbow, the internal thread, the intermediate thread and the double joint Suitable for the following marks: OMS manufactured before 2015, Hollis, Halcyon, Edge, Xdeep, Tecline, Dive Rite*, Hog Dive Rite wings may not fit...

View

Fuera de Stock

Ask us about availability

Spare parts

inflator - knee joint with screwed fitting

DTD-3406

12.36 €

DTD, inflator - knee joint with screwed fitting

En Stock

Available

Spare parts

inflator - safety valve 1,4 (OPV)

DTD-3407

12.44 €

DTD, inflator - safety valve 1,4 (OPV)

En Stock

Available

Spare parts

inflator - screw outlet flange

DTD-3409

12.68 €

DTD, inflator - screw outlet flange

Fuera de Stock

Ask us about availability

Spare parts

Inflator service kit

sfinfserv

12.00 €

Service kit for DTD X01K, X01 and Scuba Force inflator controls

Fuera de Stock

Out-of-Stock

Spare parts

Inflator valve tool

IVRT

4.78 €

This product is a tool for the removal and adjustment of the schraider valve within our inflator hoses. This assists in allowing you to remove and replace them as required during servicing.This is a useful tool for the experienced diver and service engineer; a simple and small tool engineered in metal for durability.

View

En Stock

Available

Spare parts

Inner coupling

A11918021

4.99 €

Male piece that goes inside the wing, which serves to anchor both the elbow system and the exhaust / drain valve.

Showing 1-36 of 61 item(s)